Depending on the product, MIDAS is processed as a paint or a finish applied with a spatula, trowel or palette knife and allows both straight and organic surfaces to be coated joint-free. It results in smooth or structured metal layers between 0.1 and 2.0 mm thick. After drying, the surfaces are finely sanded and subsequently polished. The surface can either be sealed or simply left natural. Depending on the object, processing is possible both in the workshop and on-site.
Not only through various application techniques, but also in final processing, the finishing of the surface can be custom-designed. As well as classical polishing of the metal skin, specific techniques of black-finishing or processing of MIDAS as an inlay are also interesting.
Available Product Lines
Solvent-based systems for use in the varnish cabin:
Artifex 3.0 (sprayable)
Water-based Systems for on-site or in the workshop: in each case available as 2-K or 1-K system (without activator, solvent-free):
Artifex 2.0 (sprayable)
Artifex 2.1 (thin putty, for application using paint roller or brush and smooth spatula texturers)
Artifex 2.2 (thick putty, for application by spatula)
Systems for surfaces with high mechanical and chemical resistance as well as exterior use (solvent-free):
Artifex 1.2 (thin putty, for application by paint roll or brush and smooth spatula textures)
Artifex 6.0 (thick putty, for application by spatula)
What is your favourite Metal?
Depending on the product, MIDAS is processed as a paint or a finish applied with a spatula, trowel or palette knife and allows both straight and organic surfaces to be coated joint-free. It results in smooth or structured metal layers between 0.1 and 2.0 mm thick. After drying, the surfaces are finely sanded and subsequently polished. The surface can either be sealed or simply left natural. Depending on the object, processing is possible both in the workshop and on-site.
Not only through various application techniques, but also in final processing, the finishing of the surface can be custom-designed. As well as classical polishing of the metal skin, specific techniques of black-finishing or processing of MIDAS as an inlay are also interesting.
10 good reasons for MIDAS Metall
- Natural metallic look, haptics and patina formation
- Suitable for surfaces in indoor and outdoor areas
- Up to 95% pure metal content (depending on product)
- Joint-free coating independent of the shape and size of the object
- Excellent adhesion properties on almost all substrates including MDF, genuine wood, plasterboard, stone, concrete, plaster, metal, ceramics, plastic, acrylic, clay etc.
- Free, artistic and custom surface design
- Fast overnight drying at room temperature
- Durability and resistance
- Frost, weather and UV resistant (depending on the product)
- Chemical resistance (depending on the product)